Nous renouvelons régulièrement notre parc avec les plus grandes marques comme, L ACOUSTIC, BOSE, TURBOSOUND, MARTIN LIGHT ,MA LIGHTING, RVE, YAMAHA, SOUNDCRAFT, SHURE, AUDIO TECHNICA, etc…
Notre catalogue n’est évidemment pas exhaustif et évolue constamment donc n’hésitez pas à nous contacter : nous aurons certainement la solution à votre demande.
Multi effet numérique stéréo
| Prix: | 10,00 € HT |
Description
Descriptions détaillées
Audio Input
- Connectors : Combined 3 pole XLR and 1/4 inch T/R/S phone jacks (2)
- Impedance : 0 dB/BAL switch position : 100kW, balanced /
- -20 dB/UNBAL switch position : 50kW, unbalanced
- A/D Dynamic
- Range : 100 dB 1 kHz, signal present, unweighted
- Levels : 0 dB/BAL switch position : -2 dBu min for full scale, +20 dBu max /-
- 20 dB/UNBAL switch position : -22 dBu min for full scale, 0 dBu max
- CMRR : 0 dB/BAL switch position : 40 dB minimum, 10 Hz to 20 kHz
Audio Output
- Connectors : 1/4 inch T/R/S phone jacks (2); balanced XLRs, pin 2 « high » (2)
- Impedance : 125W, each side, balanced
- D/A Dynamic
- Range : 95 dB 1 kHz, signal present, unweighted
- Levels : +18 dBm max, full scale (+4 dBu setting) balanced, unbalanced /
- +4 dBm max, full scale (-10 dBu setting)
- Protection : Relays provided for output muting during power on/off
A/D Performance
- Frequency
Response : 10 Hz to 20 kHz, ±0.5 dB
- Crosstalk : -65 dB max, 10 Hz to 20 kHz
- S/N Ratio : 100 dB min, 20 kHz bandwidth
- THD : 0.004% max, 10 Hz to 20 kHz
- Dynamic
Range : >100 dB, 20 kHz bandwidth
- Delay : 24 samples (0.54 msec for 44.1 kHz, 0.50 msec for 48 kHz)
D/A Performance
- Frequency
Response : 10 Hz to 20 kHz, ±0.5 dB
- Crosstalk : -80 dB max, 10 Hz to 20 kHz
- S/N Ratio : 100 dB min, 20 kHz bandwidth
- THD : 0.006% max, 10 Hz to 20 kHz
- Dynamic
Range : >95 dB, 20 kHz bandwidth
- Delay : 50 samples (1.13 msec for 44.1 kHz, 1.04 msec for 48 kHz)
A/A Performance
- Frequency
Response : 10 Hz to 20 kHz, ±0.5 dB
- Crosstalk : -55 dB max, 10 Hz to 20 kHz
- S/N Ratio : 90 dB min, 20 kHz bandwidth
- THD : 0.008% max, 10 Hz to 20 kHz
- Dynamic
Range : >94 dB, 20 kHz bandwidth, >92 dB per AES-17 section 7.3
Digital Audio Interface
- Connectors : Coaxial, RCA type
- Format : conforms to S/PDIF IEC-958 consumer standards
- Sample Rates : 44.1 kHz, 48 kHz
Internal Audio Data Paths
- Conversion : 18 bits
- DSP : 18 to 24 bits
Audio Memory Configuration
- Base memory : Two 256k x 18 DRAMs
- User
Expansion : Two SIMM sockets provided for either 1 Meg x 9,
4 Meg x 9 or 16 Meg x 9, 70 nsec DRAM modules
External Memory Card
- Connector : Accepts PCMCIA Type I cards, 68 pins
- Standards : Conforms to PCMCIA 2.0 / JEIDA 4.0
- Card Format : Supports up to 1MB SRAM (attribute memory not required)
Control Interface
- MIDI : 5-pin DIN connectors provided for MIDI IN, THRU, & OUT
- Footswitch : 1/4 inch T/R/S phone jack provided for
2 independent momentary footswitches
System detects normal-open, or normal-closed on power up
- Foot controller : 1/4 inch T/R/S phone jack provided for footpedal
(100W minimum, 10kW maximum impedance)
General
- Power
Requirements : 100-240 VAC, 50-60 Hz, 35 W, 3-pin IEC power connector
- RFI/ESD : Conforms to FCC Class B,
- EN55022 Class B (CE), IEC 801-2, IEC 801-3
- Environment : Operating temperature : 32° to 104°F (0° to 40°C)
- Storage temperature : -22° to 167°F (-30° to 70°C)
- Humidity : maximum 95% without condensation
